基于偶应力理论的格栅材料等效介质模型

考察了结构最小尺寸与材料特征长度量级相当的格栅材料等效性能,建议了基于偶应力理论的格栅材料等效介质模型以及确定等效模量的代表体元模型,给出了相应的位移边界条件. 在此基础上导出了正交各向异性偶应力介质的特征长度表达式和偶应力介质梁的抗弯刚度表达式,定义了偶应力影响因子\delta以表征梁的偶应力效应. 具体计算了几种典型的格栅材料的等效偶应力模量以及格栅梁在一定工况下的挠曲线,并与相应的有限元离散解进行对比,结果表明,等效结果具有较高精度,且当宏观结构的尺寸和微结构尺寸相差不大时,宏观结构表现出强烈的偶应力效应.偶应力介质的特征长度表征了偶应力效应的强弱,进而分析了格栅材料的相对密度,单胞尺寸以及几何构型对等效介质特征长度的影响.      

Mechanical properties of lattice grid composites

An equivalent continuum method only considering the stretching deformation of struts was used to study the in-plane stiffness and strength of planar lattice grid com- posite materials. The initial yield equations of lattices were deduced. Initial yield surfaces were depicted separately in different 3D and 2D stress spaces. The failure envelope is a polyhedron in 3D spaces and a polygon in 2D spaces. Each plane or line of the failure envelope is corresponding to the yield or buckling of a typical bar row. For lattices with more than three bar rows, subsequent yield of the other bar row after initial yield made the lattice achieve greater limit strength. The importance of the buckling strength of the grids was strengthened while the grids were relative sparse. The integration model of the method was used to study the nonlinear mechanical properties of strain hardening grids. It was shown that the integration equation could accurately model the complete stress-strain curves of the grids within small deformations.     

不同网格扭曲率下压力修正全隐算法——IDEAL求解性能研究

2008年,本文作者和陶文铨等提出了一种用于速度和压力耦合求解的高效稳定压力修正全隐算法IDEAL,该算法通过在每个迭代层次上对压力方程进行两次内迭代计算,完全克服了SIMPLE算法的两个假设,充分满足了速度和压力之间的耦合,从而大大提高了计算的收敛性和健壮性.为了进一步实现IDEAL算法的推广应用,本文基于三维倾斜方腔顶盖驱动流动,研究了IDEAL算法在不同网格扭曲率下的求解特性.研究发现,在不同网格扭曲率下,IDEAL算法的健壮性和收敛性均优于SIMPLE算法,特别在高网格扭曲率情况下,IDEAL算法求解性能更加优于SIMPLE算法.在不同网格扭曲率下,IDEAL算法健壮性保持不变,几乎可以在任意速度亚松弛因子下获得收敛的解,同时IDEAL算法最短计算耗时较SIMPLE算法减少了56%~89%,验证了IDEAL算法的优越性.     

一种简单的局部离散速度统一气体动理论格式

统一气体动理论格式UGKS(Unified Gas-Kinetic Scheme)是一种适用于从连续流到自由分子流的全流域计算格式。在该格式中一般使用统一的离散速度空间。而在高速流动中,不同节点的分布函数往往差异很大。为了保证计算的精度,离散速度空间必须满足所有节点的需要,占用了大量的内存。采用局部的均匀离散速度空间,离散速度的范围随节点状态的变化而变化,从而降低了内存的需要,并通过引入背景网格避免了不同节点离散速度的插值。最后,通过两个一维算例对该方法进行了测试。测试结果显示,采用局部离散速度空间能够得到可靠的结果,并且在模拟高速流动时计算效率明显提高。     

红外图像的疲劳状态识别方法

目的：为了解决光照变化对疲劳检测系统造成的准确性不高的问题,提出了一种近红外环境下判断人眼状态的方法,即针对红外光补图像的人眼状态判断。方法：首先,利用Adaboost算法对人眼区域进行定位,在网格法标记人眼瞳孔部分的基础上,进行Retinex红外图像增强。接着,对二值化与边缘检测后的红外图像分别进行网格法闭合度计算,得到人眼闭合度。最后,根据闭合度计算结果设定双阈值并结合PERCLOS来判断眼睛状态。结果：在DM642硬件平台上进行疲劳检测试验,实验结果表明,人眼状态识别率达到了90%以上,且平均每秒能处理21帧图片。结论：证明了该方法不仅能有效解决光照变化带来的问题,而且满足疲劳状态检测系统的快速性、可靠性和有效性等要求。     

Finite volume multigrid method of the planar contraction flow of a viscoelastic fluid

This paper reports on a numerical algorithm for the steady flow of viscoelastic fluid. The conservative and constitutive equations are solved using the finite volume method (FVM) with a hybrid scheme for the velocities and first‐order upwind approximation for the viscoelastic stress. A non‐uniform staggered grid system is used. The iterative SIMPLE algorithm is employed to relax the coupled momentum and continuity equations. The non‐linear algebraic equations over the flow domain are solved iteratively by the symmetrical coupled Gauss–Seidel (SCGS) method. In both, the full approximation storage (FAS) multigrid algorithm is used. An Oldroyd‐B fluid model was selected for the calculation. Results are reported for planar 4:1 abrupt contraction at various Weissenberg numbers. The solutions are found to be stable and smooth. The solutions show that at high Weissenberg number the domain must be long enough. The convergence of the method has been verified with grid refinement. All the calculations have been performed on a PC equipped with a Pentium III processor at 550 MHz. Copyright © 2001 John Wiley & Sons, Ltd.     

Routing of 2-D switching networks by their embedding into cubes

The proposed all-optical 2-D switching networks are (i) M×N-gon prism switches (M2, N3) and (ii) 3-D grids of any geometry N3. For the routing we assume (1) the projection of the spatial architectures onto plane graphs (2) the embedding of the latter guest graphs into (in)complete host hypercubes (N=4) and generally, into N-cube networks (N3) and (3) routing by means of the cube algorithms of the host. By the embedding mainly faulty cubes (synonyms: injured cubes, incomplete cubes) arise which complicate the routing and analysis. The application of N-cube networks (i) extend the hypercube principles to any N3 (ii) increase the number of plane host graphs and (iii) reduce the incompleteness of the host cubes. Several different embeddings of the intersection graphs (IGs) of 2-D switching networks and several different routings are explained for N=4 and 6 by various examples. By the expansion of the grids (enlargement) internal waveguides (WGs) and internal switches are introduced which interact with the switches of the original 3-D grid without increasing the number of stages (NS). The embeddings by expansion apply to interconnection networks whereas dilation-2 embeddings (dilation ≡ distance of the nearest-neighbour nodes of the guest graph at the host) are rather suitable for the emulation of algorithms. Concepts for fault-tolerant routing and algorithm mapping are briefly explained.     

Governing equations, experiments, and the experimentalist

It is argued that the most important test of the understanding of any experiment is whether or not the results are consistent with the equations and boundary conditions believed to govern the flow. If they are not, then either the measurements are incorrect, the equations or boundary conditions are wrong, or the experiment performed was not the one believed to have been done. It is suggested that many apparently contradictory experimental results are, in fact, the result of the latter and have not been recognized as such because of a failure to apply the governing equations to the data. The arguments are supported by examples from turbulent shear flow experiments.     

一种特殊设计约束面的有限元网格优化问题

网格设计质量的优劣是有限元分析的关键，对一些特殊的设计约束面，网格的优化设计是建模时需要首先研究解决的问题，本文对两种材料在几何尺寸差异很大情况下的有限元网格进行了优化设计并对其进行了讨论。